dual bed power pivoting conveyorThis device is used for the transfer of product from one conveyor to a perpendicular conveyor while maintaining load orientation. Device includes a fixed Pivot Point which can be located at either end or in the center along one side of the device. This device can also be used as a “Gateway” to provide fork truck access through a conveyor system. The unit is an integral part of a Power Live Roller Conveyor.

Transition Sections: Provided to match the adjoining Conveyors’ width. Sections can be Non-Power or Chain-Assisted by the adjoining C&M Powered Conveyor.

Pivot Post: Floor Mounted with Heavy Duty Flange Mount Bearings.

Support Wheels: 6” diameter monothane tread wheels which ride on the floor surface. Surface must be smooth and level to ensure proper operation and to prolong wheel life.

power pivoting conveyor line drawingRotational Drive System: One (1) 8” diameter rubber drive wheel (90 Durometer) which is mounted to a Pivoting Drive Base with a captivated Air Mount to compensate for any floor variations. Unit is powered by a 1 hp brakemotor which is totally enclosed, industrial rated, 1750 rpm motor, mounted to an in-line reducer. Reducer is grease filled and maintenance free for a 2-year period.

Safety Features: Device is equipped with a horn and flashing light that is activated during the rotation of the device. Internally mounted photo-eye sensors insure positive load placement before rotation.

Controls: Available with Manual, Automatic, or OEM Controls. All rotational positioning is performed through proximity sensors mounted to the base of the device. Conveyor includes photo-eye activated controls for both ends.

Power: Floor mounted mast with multiple conductor cable which connects to the pivoting base of the unit.

Preassembly: Unit is wired at the factory and (if applicable) plumbed to a junction box.

Device Height: 12” TOR minimum with extensions available for other heights.

Rotational Speed: 30, 45, or 60 fpm available. Variable Speed Drive is also available as an option.

Capacity: 5,000 lbs. maximum

Voltage: System Voltage is 230/460 volt, 3 phase, 60 hertz with 115 volt, single phase control voltage.

Back to Systems.