Heavy duty roller conveyor

Construction:

  • Available in 3″ and 4″ structural steel channel
  • Side frames are in standard 10 ft. lengths, other lengths available upon request
  • Each 10 ft. section contains 3 welded cross members

Height:

  • 12″ floor to top of roller standard
  • Other heights available upon request

Clearance: Roller height 1/2” above side frames

Rollers:

  • Tube is “Swedged” over bearing, no sharp edges
  • 2-1/2″ diameter x 11 gauge roller
  • Same load rating as 10 gauge
  • Available in 5/8″ and 11/16″ hex shaft, spring-loaded
  • 750 lbs. per roller

Support legs:

  • 5 ft. on center
  • 3″ structural steel channel

Bearings:

  • Hardened steel raceways
  • Broached inner race
  • 11- 3/8″ diameter hardened steel balls
  • Pressed steel shell with teflon seals
  • High temperature, waterproof lubricant for smooth performance
  • The outer seal will “trap” foreign matter to prevent entry into the bearing

Back to Systems.